Within the Page Setup panel, select “None” from the cutting mat drop-down menu just as we did with the Kiss Cut option. Make sure your machine is connected and synced with your software. To achieve this type of cut, you need to make sure you have a compatible Cameo 4 model. It can also help you avoid the curling some material gets when you remove it from sticky mats. It also saves you time since you don’t have to apply and remove material from a mat between cut jobs.

Pop-Out Cut mode can be beneficial in preparing pages in advance so you have fewer tiny pieces to keep track of. The resulting cut job can be popped out of the material once the cutting action has been completed. It does this by lifting the blade in tiny segments as it cuts leaving part of the material connected to the full page. Once the material is removed from the cutting machine, simply pop the cut design from the paper.īecause of a channel that runs under the blade area, the Cameo 4 can preform a special cutting action, which cuts all the way through the material even though there is not a cutting mat. With this feature, the Cameo 4 will make cuts but keep the material in place using perforation cuts in strategic places. The second option to cut without a mat is new and exclusive to the Cameo 4 models and higher! For the first time ever, cut materials like paper and cardstock without a cutting mat. To learn how to do a test cut, watch this video. However, we always recommend that you perform a test cut before you attempt to cut out your entire design. The default cut settings for your selected media should work to cut through your material but not through your backing. Set your media size to match your actual media.

On the Page Setup panel, select “None” from the Cutting Mat menu. To achieve this type of cut, the material must fit between the rollers of your machine, so make sure you adjust your rollers accordingly. The Kiss Cut option has always been available for the Portrait 1 and 2 and Cameo 1 through 4 machines, including the new Cameo 4 Plus. This also means that if you have rolls of vinyl or heat transfer, you can cut the material directly from the roll! The built-in roll feeder of the Cameo 4 and Cameo Plus makes cutting from a roll even easier. This allows you to easily peel or weed your design away from the backing and then apply to your desired surface. You can these material types into the machine without placing the material on a cutting mat, and the machine will cut only through the material’s surface but not all the way through the backing. This includes vinyl, heat transfer, and sticker sheets. A Kiss Cut is used when your material has its own backing. The first option to cut without a mat is the Kiss Cut option.

Using flexisign witgh silhouette cameo